Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP: Issues with TempoSelect when MoreLoops=2

If you want your loops to all be even multiples of another loop, I believe you need to have LoopCopy set to "ti", for "time".

TH

On Sat, Nov 29, 2008 at 7:58 AM, Stephen Scott <stevoj@yahoo.com> wrote:


OK Andy, I tried this exactly as suggested.  I've set the tempo to 120bpm, (btw 8th/Cycles=8, so that the display reads 2.0 for the cycle length).  What happens is that the first loop records just fine for as long as I need.  When I switch to Next Loop, the display shows me that it's on loop2 (OK), the red LED counts time as usual (OK) and the green cycle LED counts up as I think it should (ie, it increments by one every 2 seconds).  BUT when I press RECORD, the display stops at, say, 3.6 or 5.4, ie NOT a multiple of 2 as expected.



This is now happening consistently (previously I thought I was getting it work OK sometimes, so consistency is good anyway).  Also, previously, even when it was working OK, I'd save the preset parameter, but when I came back it to it later, it wouldn't work.