Support
Looper's Delight
|
Support |
|
|
Best rack mount looping mixer ever, but 3u Http://Www.rane.com/pdf/old/cm86man.pdf Look at the manual see if you agree. Andy o On Mar 12, 2011, at 7:29 AM, "andy butler" <akbutler@tiscali.co.uk> wrote: > mark francombe wrote: >> Currently a Behringer Eurorack Pro 1U 16 input, 1 aux, mute buttons, >pan. > >> Absolute necessities MUST BE (dont post if these are not available) >> 1) 1U 2) 8 STEREO channels (16 mono is also ok, but annoying..) >> 3) 1 AUX SEND > > Alesis Multimix Line 8 > (it's not hissy) > ...and it's mod-able, > the circuit schematic is available. > > >> 1)Some other way to send signal to my loopers. Currently I'm wasting >the send on that. >> I could do with either an EXTRA send but i dont really like that, >because I dont NEED to set a level everytime I want to loop... I want to >do that on the looper, I just want to route the signal, via a switch. > > I could look at the Alesis schematic and see if that's possible. > ...but it would need holes drilling in some tough metal, > and (i expect) some additional resistors. > >> The Behringer has a MUTE switch, and Ive often thought about if I could >take a signal from THAT bus to the loopers, so instead of muting it >routed. > > while on some mixers the Mute goes to a Bus, that's not the > case here. > Likely those switches are just single pole single throw > (just on/off)...it might be possible to re-purpose them > as sends, but I think you'd need some additional circuitry. > > Without a schematic, modding isn't at all easy. > > My pre-schematic attempt to mod the Alesis was a disaster. > >> 2)Some kind of insert: just on the main outs would be ok (I neens to >put my WHOLE rig thru one stereo effect. (I can achieve this just by >putting the mixer before this effect so its not a biggie) > > another possible Alesis mod would do this (but would use > up the circuit you wanted for the aux send) > >> 3)A really basic EQ. > > no ideas > > andy >