Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: Midi out from edp.



have you thought of changing between Out to OuS (suspended mode for midi settings) this give clock with no start / stop info?

I still think its the offsets because it sounds excactly like the issue i had..but i may be wrong.



> Date: Mon, 5 Sep 2011 10:20:35 +0100
> Subject: Re: Midi out from edp.
> From: rickygrahammusic@gmail.com
> To: Loopers-Delight@loopers-delight.com
>
> There are set MIDI note commands that the EDP receives to trigger a
> particular function. You need to have a look at the manual and match
> it up with the notes your sending.
>
> On Mon, Sep 5, 2011 at 10:17 AM, mark francombe <mark@markfrancombe.com> wrote:
> > Ahh, going off track here I think guys.. good point tho Philip...
> >
> > What Im talking about is nothing to do with offset I think, as I dont have
> > to be sending ANYTHING from my foot controller.. when I look at midi
> > monitor, Im getting stop commands mixed in with the clock timing pulses, but
> > on the OTHER EDP, nothing... just clean midi clock... but I do remember
> > something about the timing midi beeps... I havent had a chance to check
> > Manual yet, since your hint Ricky, but maybe Philip is right, maybe those
> > beeps are affected by offset.. have to check... but its NOT a note off Im
> > getting, its a stop song (I think)
> >
> > M
> >
> > On Mon, Sep 5, 2011 at 11:10 AM, Ricky Graham <rickygrahammusic@gmail.com>
> > wrote:
> >>
> >> If in doubt, look at the manual :-) They list MIDI note number
> >> commands. Perhaps you are sending a command you are unaware of.
> >>
> >> On Mon, Sep 5, 2011 at 10:02 AM, phillip wilson <phillwilson@hotmail.com>
> >> wrote:
> >> > ok i know this one......................
> >> >
> >> >
> >> > what number ofset are you using ???
> >> >
> >> >
> >> > there are some odd notes that get sent in minus numbers bellow the
> >> > 0.........
> >> >
> >> > try altering the offset numbers for your midi commands by 10 - 20 and
> >> > see
> >> > what happens.
> >> >
> >> >
> >> > i had this using 3 edps............ 2 would send clock fine and the
> >> > third
> >> > would  just kind of instantly send a start song but also send out a
> >> > timing
> >> > pulse that kills it so on my electribe it sounded like i got a single
> >> > drum
> >> > beat.
> >> >
> >> >
> >> >
> >> >> Date: Sun, 4 Sep 2011 23:33:57 +0100
> >> >> Subject: Re: Midi out from edp.
> >> >> From: rickygrahammusic@gmail.com
> >> >> To: Loopers-Delight@loopers-delight.com
> >> >>
> >> >> I am not sure, but MIDI clock and MIDI note messages are not the same
> >> >> thing, so it could be the source of your problem. I haven't used my
> >> >> EDP in some time (since using Echoloop in software). Yes, you need
> >> >> Andy to clarify ;) Andy?
> >> >>
> >> >> On Sun, Sep 4, 2011 at 11:24 PM, mark francombe
> >> >> <mark@markfrancombe.com>
> >> >> wrote:
> >> >> > What? Is that possible?, but wait... YES...!!!
> >> >> > the edp sends little beeps on the bar and one on the beat doesnt it?
> >> >> > Maybe
> >> >> > THAT it?? fuckity fuck... How do I disable that.. weirdly my other
> >> >> > edp
> >> >> > doesnt do that..
> >> >> > Is this just a midi channel thing then?
> >> >> >
> >> >> > I think you have put me on to something Ricky.. thx... wheres the
> >> >> > Butler
> >> >> > when you need him...?
> >> >> >
> >> >> > In the end at our rehersal, we just all set the same exact BPM, and
> >> >> > it
> >> >> > was
> >> >> > pretty ok... A bit Steve Reich at times, but that no bad thing!
> >> >> >
> >> >> > M
> >> >> >
> >> >> >
> >> >> > On Sun, Sep 4, 2011 at 7:29 PM, Ricky Graham
> >> >> > <rickygrahammusic@gmail.com>
> >> >> > wrote:
> >> >> >>
> >> >> >> Sounds to me like you are sending MIDI note on and off messages, not
> >> >> >> MIDI
> >> >> >> clock.
> >> >> >>
> >> >> >> On Sun, Sep 4, 2011 at 5:57 PM, mark francombe
> >> >> >> <markfrancombe@gmail.com>
> >> >> >> wrote:
> >> >> >> >
> >> >> >> > Weird thing, playing with some guys right now, and they need midi
> >> >> >> > clock
> >> >> >> > from
> >> >> >> > me, they say that thr clock they are getting from me has a kind of
> >> >> >> > stop
> >> >> >> > In
> >> >> >> > it... So their gear is not working... Weirdly this happened to me
> >> >> >> > recently
> >> >> >> > when this same edp was plugged into the repeater, the repeater
> >> >> >> > would
> >> >> >> > just
> >> >> >> > stop after one note...
> >> >> >> > Help
> >> >> >> >
> >> >> >> > M
> >> >> >> > Sent from my (advertisement removed)
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > Mark Francombe
> >> >> > www.markfrancombe.com
> >> >> > www.ordoabkhao.com
> >> >> > http://vimeo.com/user825094
> >> >> > http://www.looop.no
> >> >> > twitter @markfrancombe
> >> >> >
> >> >>
> >> >
> >>
> >
> >
> >
> > --
> > Mark Francombe
> > www.markfrancombe.com
> > www.ordoabkhao.com
> > http://vimeo.com/user825094
> > http://www.looop.no
> > twitter @markfrancombe
> >
>