RE: Midi out from edp.

[phillip wilson <phillwilson@hotmail.com>]

That is excactly how i found the issue.....

I do have the note numbers for mapping 3  EDPs to one Berhinger somewhere....I managed it  (just) for my needs which are

[Mute] [Sus] [ Ovdb] [Sus Insert] [Undo][,Next Loop]
[Rec,] [Overdub,] [ Mulitple] [Hall Speed] [Reverse ]  [Vol]    [FdBk]

on each layer plus on layer 00 three all reset buttons (well 2 all reset and a record button which I long press  because the 3rd echoplex reset would fall off the top numbers of the midi spec.

---

From: mark@markfrancombe.com
Date: Mon, 5 Sep 2011 23:02:35 +0200
Subject: Re: Midi out from edp.
To: Loopers-Delight@loopers-delight.com

On Mon, Sep 5, 2011 at 10:39 PM, Matthias Grob <matilists@gmail.com> wrote:

are you saying that you found a bug in the EDP, Mark??  Congrats!

Well, seeing as one of my favorite features of the edp was apparently first deemed a bug, then I say.. Carry on Matty! You make lovely bugs! 

 

easily possible that we never tested MIDINote# = 0
so you do that to have both EDPs on one MIDI channel... for a lack of channels or is there another advantage?

Yes I do, no particular advantage, but the Behringer 1010 pedal, (Not my pedal of choice you understand?) only has the ability to preset what midi channel a nidi note is sent on, and that is pedal-wide, regardless of patch or bank. So if you set Midi notes to be sent on channel 16, then all midi notes are on channel 16. A huge limitation of an otherwise great pedal. But not all (any) pedals are made totally with the looper in mind, I suppose...  (Although I hear Mr Gordius is pretty close)
*sigh*

*/Mark pulls out empty pockets

M.

--
Mark Francombe
www.markfrancombe.com
www.ordoabkhao.com
http://vimeo.com/user825094
http://www.looop.no
twitter @markfrancombe