[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP input/output gain & distortion problems



Hi Fabio !

Open up your machine again and check the soldering very critically .  
You might have a dry joint or so, and physically moving it might have 
restored a good contact, temporarily .

If unsure about a joint, redo it .

If still unsure, have someone with "known good soldering skills" 
check it out for you .

Hope this helps .

Cheers .


Keep 'em oscillating :)


Hugo
=

(crawling back under me flagstone, waiting for the first sighting of 
either an EDP or Repeater in Belgium ;^) )