[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: OT--FS300 Footswitch--How Do I return it to its previous Wiring



did you keep the diodes that were in it?
one switch grounds the tip,
one switch grounds the sleeve,
the third is wired to both through the diodes,
so current can only flow from ground to tip and 
from ground to sleeve.
(the marked end of each diode connects to the jack)

----- Original Message ----- 
From: "Gary Lehmann" <relayonemanband@cts.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Monday, April 02, 2001 4:48 PM
Subject: OT--FS300 Footswitch--How Do I return it to its previous Wiring


> Subject line says it all, but here goes--
> After trying the use of the FS300 as a foot controller for the Echoplex
> Digital Pro, I have decided for various reasons to return to the use of 
>the
> EDP foot controller which I purchased with the EDP.  That being said, 
>how do
> I rewire the Digitech FS300 so that it once again functions as a TRS 
>three
> button footswitch?
> Gary
>