[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

OT--FS300 Footswitch Wiring

> did you keep the diodes that were in it?

I never removed any parts (!)

> one switch grounds the tip,
> one switch grounds the sleeve,
> the third is wired to both through the diodes,
> so current can only flow from ground to tip and
> from ground to sleeve.
> (the marked end of each diode connects to the jack)

> ----- Original Message -----
> From: "Gary Lehmann" <relayonemanband@cts.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Monday, April 02, 2001 4:48 PM
> Subject: OT--FS300 Footswitch--How Do I return it to its previous Wiring
> > Subject line says it all, but here goes--
> > After trying the use of the FS300 as a foot controller for the Echoplex
> > Digital Pro, I have decided for various reasons to return to the use of
> > EDP foot controller which I purchased with the EDP.  That being said,
how do
> > I rewire the Digitech FS300 so that it once again functions as a TRS
> > button footswitch?
> > Gary

Oh--that's very different.  Guess I'm not as smart as I thought--
I'm not sure what to do now.