Re: expression pedal with all access

["Luigi Meloni" <Luigimeloni74@libero.it>]

Currently I'm using the Boss FV300L, it's all metal, it is not too heavy 
and
works well. I've also tried the old Korg expression pedals and I think they
are good, too, plus you can find them used for cheap. Don't try Bespeco,
since they are almost the same thing as the Proel (I think they are even
produced in the same factory here in Italy). The only advice I can give you
is to try to find metal expression pedals, since they seem to work better
and be more reliable in the value excursion.

Peace
Luigi
----- Original Message -----
From: "Peter Einhorn" <petereinhorn@mac.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Thursday, May 16, 2002 7:00 AM
Subject: Re: expression pedal with all access


> Thanks for responding. Should I just return it? What's a pedal that one
can
> use? The Ernie Balls don't seem to be shipping anymore.
>
> Thanks again ,
> Peter
>
> > Probably the problem is in the structure of the pedal itself. I have 
>had
a
> > pair of those proels, and found the same problem on both...
> > ----- Original Message -----
> > From: "jim palmer" <jimp@pobox.com>
> > To: <Loopers-Delight@loopers-delight.com>
> > Sent: Wednesday, May 15, 2002 4:14 PM
> > Subject: Re: expression pedal with all access
> >
> >
> >> using 20k is supposed to insure more than enough to get 100% feedback.
> >> maybe you have it connected wrong?
> >> the output of the pedal should be connected to the feedback input on
the
> > edp.
> >> also, maybe there is an adjustment on the pedal to set the min/max?
> >> make sure the cable is good...
> >> if you can get a multitester, you can test to make sure the output
> > resistance of
> >> the pedal is correct...
> >> if all this checks out, maybe something is wrong with the edp itself?
> >>
> >> check this out from the ld archives:
> >>
> >
http://www.loopersdelight.com/cgi-bin/wilma_hiliter/LDarchive/199805/msg0030
> > 5.html?line=34#hilite
> >>
> >>
> >>> Thx Ben-
> >>> well I got the 20k ohm Proel pedal. [didn't Kim say 20k ohm is what 
>we
> >>> want?].
> >>> It won't open the feedback line all the way [enabling an infinite
loop],
> >>> which is no good.
> >>> If I  replace it with a 25k ohm linear pot, will it go to Max. value
for
> >>> feedback when in the down position? What do I need to do to 
>accomplish
> >>> this.?
> >>>
> >>> Thx
> >>> peter
> >>>
> >>
> >>
> >>
> >
> >
> >
>
> My email will soon be ONLY   petereinhorn@mac.com
> Please update your address book.
>