[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: expression pedal with all access



Thanks for responding. Should I just return it? What's a pedal that one can
use? The Ernie Balls don't seem to be shipping anymore.

Thanks again ,
Peter

> Probably the problem is in the structure of the pedal itself. I have had 
>a
> pair of those proels, and found the same problem on both...
> ----- Original Message -----
> From: "jim palmer" <jimp@pobox.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Wednesday, May 15, 2002 4:14 PM
> Subject: Re: expression pedal with all access
> 
> 
>> using 20k is supposed to insure more than enough to get 100% feedback.
>> maybe you have it connected wrong?
>> the output of the pedal should be connected to the feedback input on the
> edp.
>> also, maybe there is an adjustment on the pedal to set the min/max?
>> make sure the cable is good...
>> if you can get a multitester, you can test to make sure the output
> resistance of
>> the pedal is correct...
>> if all this checks out, maybe something is wrong with the edp itself?
>> 
>> check this out from the ld archives:
>> 
> 
>http://www.loopersdelight.com/cgi-bin/wilma_hiliter/LDarchive/199805/msg0030
> 5.html?line=34#hilite
>> 
>> 
>>> Thx Ben-
>>> well I got the 20k ohm Proel pedal. [didn't Kim say 20k ohm is what we
>>> want?].
>>> It won't open the feedback line all the way [enabling an infinite 
>loop],
>>> which is no good.
>>> If I  replace it with a 25k ohm linear pot, will it go to Max. value 
>for
>>> feedback when in the down position? What do I need to do to accomplish
>>> this.?
>>> 
>>> Thx
>>> peter
>>> 
>> 
>> 
>> 
> 
> 
> 

My email will soon be ONLY   petereinhorn@mac.com
Please update your address book.