[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Loop 4 Problem
Bret,
I re installed the Eproms following your directions but still I get
nothing. How long do you have to wait for the "Loop 4" to start scrolling?
Gary
> [Original Message]
> From: Bret <echoplex@yahoo.com>
> To: <Loopers-Delight@loopers-delight.com>; <gz3739@earthlink.net>
> Date: 6/23/02 12:39:48 AM
> Subject: Re: Loop 4 Problem
>
> Gary,
> I have to ask the obvious, were you careful to orient each of the
> Eproms in the right direction, sure you put the even Eprom in the even
> socket, and odd in the odd, and that no legs of the eproms were bent or
> missed the socket?
> These would be the most likely causes of malfunction.
> The little 'notch' on one end of the eprom should face away from the
> transformer side of the edp (have the notch to your left as you are
> facing the edp), the even eprom is towards the back of the edp, the odd
> eprom is towards the front of the epd.
> I hope that is clear. A picture would be better
>
> bret
> --- Gary Rouzer <gz3739@earthlink.net> wrote:
>
> <HR>
> <HTML><HEAD>
> <META content="text/html; charset=windows-1251"
> http-equiv=Content-Type>
> <META content="MSHTML 5.00.3105.105" name=GENERATOR></HEAD>
> <BODY>
> <P>
> <DIV></DIV>
> <DIV>Hi,</DIV>
> <DIV> </DIV>
> <DIV>I installed my new Loop4 software two days ago but I've got a
> problem. When I powered the EDP up, while holding the
> parameters button, the "Loop 4" never scrolled across. I waited for
> about 2 minutes. I emailed Shane at Gibson but have not received a
> response yet. I reinstalled the Loop3 but now it
> doesn't work either. Any suggestions?</DIV>
> <DIV> </DIV>
> <DIV> Gary</DIV>
> <DIV> </DIV></BODY></HTML>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! - Official partner of 2002 FIFA World Cup
> http://fifaworldcup.yahoo.com
--- Gary Rouzer
--- gz3739@earthlink.net
--- EarthLink: The #1 provider of the Real Internet.