Re: Loop 4 Problem

[Kim Flint <kflint@loopers-delight.com>]

At 04:30 PM 6/22/2002, Gary Rouzer wrote:
>Hi,
>
>I installed my new Loop4 software two days ago but I've got a problem. 
>When I powered the EDP up, while holding the parameters button, the "Loop 
>4" never scrolled across. I waited for about 2 minutes. I emailed Shane 
>at 
>Gibson but have not received a response yet.  I reinstalled the Loop3 but 
>now it doesn't work either. Any suggestions?
>
>     Gary


Since you bought the LoopIV software directly from Aurisis Research, it 
make a bit more sense to contact us directly when you had a problem 
installing it...

But anyway, if Bret's suggestions don't work it is possible that you 
somehow damaged something while installing the roms or opening up your 
Echoplex. To answer your other question, the "Loop4" begins scrolling 
immediately when you turn on the power. There is no delay. The fact that 
yours is now doing nothing on power up with both Loop4 and Loop3 roms 
indicates a hardware problem of some sort. Hopefully not serious, but you 
may want to carefully inspect things to see if anything obviously got 
damaged in the process. Send me a mail if you need more help with it or 
with getting in touch with Shane.

kim



______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com