Re: FCB1010 UnO SooperLooper question

[Jesse Chappell <essejlc@gmail.com>]

I would recommend using note messages for all commands going to
sooperlooper instead of PC when using a FCB1010.  That gives you the
extra flexibility to do long presses (held for longer than 1 second)
because of the note-on/off sent on press and release.  For instance, a
long press of commands like record/overdub/etc, will automatically
make it a SUS operation and the release will finish the command.
Also, a long press of undo will reset the loop.

I can't comment on the strange issues you are having, though....

jlc

On Wed, Jan 28, 2009 at 1:08 AM, Loren Claypool <looper@theclaypools.com> 
wrote:
> I received an FCB1010 with UnO upgrade today and tested it this evening 
>with
> SooperLooper running inside of Live. I had an issue that I suspect is
> something I'm missing in either the FCB1010 setup or my SooperLooper MIDI
> bindings and am hoping for some input from the FBC1010 experienced folks.
>
> I have Direct Select Off, Switch Mode momentary, PC values 1-10 for the
> switches, one expression pedal at CC7 and the other CC27. Everything 
>works
> great except when I finish recording a loop the two expression pedals 
>swap
> settings. For example, if the left pedal is controlling selected feedback
> and the right pedal is controlling selected volume, after recording the 
>left
> pedal is now volume and the right pedal is feedback. If I change loops 
>the
> pedals revert back and all is well until I record the next loop. 
>Thoughts?