Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: SV: EDP -- Behringer FCB100 oddness

At 01:19 PM 8/17/2002, Per Boysen wrote:
> >>on 8/16/02 2:02 PM, Bruce Comens at bcomens@mail.nexus.it wrote:
> >>The first press of record on the footpedal (from powerup or after 
>using the
> >>front panel controls of the edp) produces a reset (long press) instead 
>of a
> >>record.  After that it works normally (short press = record on or off).
> >>The first press of record on the front panel (after using the 
> footpedal) has
> >>no effect at all.  After that it works normally.

Your problem, as I think you discovered, is that the Behringer pedal is 
only capable of controlling the EDP using notes, not continuous controller 
messages. You were only sending the "press", but not the "release".

>I have a similar problem with my EDP/LOOP4. The first press of record, 
>using
>the EDP analog footpedal, creates a short loop as if set to "sustain rec",
>even though it is set to "toggle rec". Sometimes it's working as it 
>should,
>but I don't dare to take chansces. So I always start my set by pressing 
>the
>"virtual rec" by midi from the Behringer FCB1010 and this workaround has
>never let me down.

sounds like the button might be dirty or otherwise going bad. try 
replacing it.

kim


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com