Support
Looper's Delight
|
Support |
|
|
Do you have max? I'm curious if the max patch itself would work on your machine..... Jeff Kaiser http://www.JeffKaiser.com pfMENTUM.com • AngryVegan.com On Aug 26, 2006, at 3:18 PM, Per Boysen wrote: >>> I'm checking out the Kaiserlooper here now but no audio gets looped. >>> The "DSP Status" window shows the correct settings for my G5 and >>> Multiface audio interface. I can monitor the Multiface separately >>> and I can see that no audio is being piped from the software to the >>> physical output. Should there be some graphic indication in >>> Kaiserlooper on what's going on? > > On 27 aug 2006, at 00.00, Jeff Kaiser wrote: >> >> Hi Per, >> >> Awesome! somebody tried it....oh....and it didn't >> work....hmmmm....bummer... :-) >> There are three places you should see activity: >> Is there any input level being shown on the LED under "input level?" >> And is anything showing at the LEDs under the "Master Volume?" >> Then, when you loop, there should be indication under the particular >> loop strip that there is level there when you raise the fader. >> >> Just curious, what is the CPU Usage reading under the on switch? And >> maybe not so clear, play of the loop starts when you release the >> record button >> >> Thanks, so much, Per! > > > The CPU Usage meter does flicker between 2 and 3. Both in the main > mixer window and the smaller "CPU Utilization" box of the DSP Status > window. This is on a 2x2 GHz G5 with 2 GB ram. Still no signs of any > activity inside the Kaiserlooper though. > > Greetings from Sweden > > Per Boysen > www.boysen.se (Swedish) > www.looproom.com (international) > http://tinyurl.com/fauvm (podcast) > http://www.myspace.com/looproom > > >