[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Looper development and production costs?

I don't have access to it from where I am at the moment, but I can send 
something later. If you look in the manual there is a print of some 
portions of the front panel on page 2-i. the two graphics pasted together 
are basically it:


ah, I did find this file, which is just the graphics, but does not show 
hole cutouts.


I'll send you some more later and we'll see what you come up with.


At 03:32 PM 10/16/2001, you wrote:
>I'd need a template, as I don't own one.  I could fake it, but an image 
>of the
>front would help a lot.
>Kim Flint wrote:
> > At 12:35 PM 10/16/2001, Mark Sottilaro wrote:
> > >EXACTALLY.  I'm not even sure how it would cost an aditional $2 per 
> > >Just cost of the design and new silk screen.
> >
> > ok, Mark. despite whatever it may seem, I totally agree with you that 
> > are important.
> >
> > So how about if you show us how it should be done? Do a quick 
>rendering of
> > a new echoplex faceplate design, and put it up for us to see. I would
> > really like to know how a pro would do it better than my amateur job.
> >
> > kim
> >
> > ______________________________________________________________________
> > Kim Flint                     | Looper's Delight
> > kflint@loopers-delight.com    | http://www.loopers-delight.com

Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com